Purchase of equipment before ordering a kitchen
A single work surface is the key to the convenience and aesthetic appeal of the kitchen interior. The dimensions of the hob, oven and sink must correspond to the dimensions of the countertop. If you buy equipment in advance, there is a risk not to build it into the headset: you have to cut the countertop.
Buying a kitchen in an already renovated room
The selection and installation of a kitchen set must be carried out simultaneously with the laying of communications and wiring of an electrician. All furniture and household appliances have a certain competent location. If during installation of cabinets and cabinets there is a need to move the oven or sink, fresh finish will suffer.
Inconvenient height of pedestals
Most often, when ordering a headset, standard parameters are selected, and after installing it, it turns out that cooking in a new kitchen is inconvenient. The height of the working area consists of the height of the base, floor cabinets and countertops - this is about 85 cm. But tall or low people should be more careful about these sizes.
Wrong location of outlets
The placement of sockets is considered at the planning stage and creating a design project. To calculate the number of required electric points, it is necessary to count all household appliances, adding to the resulting number 25% in reserve. Do not place outlets above the hob, use extension cords or connect large equipment without a separate machine for each appliance.
Too wide drawers
In furniture stores there are drawers that open easily, look stylish and seemingly hold a huge number of items. Their width is about 110 cm, but such products are not suitable for daily use. Filled with dishes or dry products, the boxes become heavy and may fail early.
Ill-conceived lighting
The lack of lighting in the working area will affect cooking not in the best way: if the kitchen is equipped with a single chandelier, the shadow of a person will fall on the countertop. The LED strip above it will correct this drawback, but all the lamps have power supplies, and their location should be provided in advance.
The lack of free zones on the countertop
For the convenience of using the kitchen and saving energy, the layout should obey the rule of the working triangle. The sink, refrigerator and stove should be close to each other. Between them, you must leave empty areas: then moving around the kitchen will take a minimum of time.
Glazed facades
Smooth facades reflect light, visually expand the space and look spectacular, but exactly until the moment when fingerprints appear on them. To make the kitchen look neat, you have to wash the doors daily. Is the glossy shine worth the time?
Lots of open shelves
Shelves visually facilitate the design of the headset, but also are a place of dust accumulation. If you overdo it with the number of open racks, then the kitchen, filled with dishes and decor, will turn into a cluttered room in which it will be difficult to maintain order.
Hurry at the signing of the contract
When ordering a kitchen, you need to think through the design to the smallest detail. All important points should be reflected on papers and thoroughly checked by the customer. It is also not recommended to make full payment: not all firms treat their customers in good faith.
Any kitchen should be comfortable, which means that when ordering a headset, you should think through it individually. You should not save on material, accessories and drawers: then the kitchen will last for many more years.